Silent Pro & Ultra Silent Pro Drainage Pipes

Drainage you won’t hear.

Tested to EN 14366 Learn more

Get the highlights.

Three layers.
One quiet pipe.

Smooth PP inside, a dense mineral core in the middle, tough PP outside.

Cutaway of a RAKtherm Silent Pro pipe showing the three-layer wall

12 and 17 dB(A).

Ultra Silent Pro sound levels, lab-tested to EN 14366.

Blue RAKtherm Silent Pro pipe with sound waves fading inside it

Push-fit. No glue.

Captive EPDM sealing ring for fast, leak-tight joints.

Ultra Silent Pro 45 degree branch with push-fit sockets and EPDM sealing rings

Two levels of quiet.

Silent Pro for everyday buildings. Ultra Silent Pro where every decibel counts.

Silent Pro and Ultra Silent Pro pipes with sound waves inside

Three-layer co-extrusion

Quiet is part
of the design.

Silent Pro and Ultra Silent Pro are made from high-density mineral-reinforced polypropylene (PP-MD). The heavy core adds wall mass and damps vibration, cutting both airborne and structure-borne noise from wastewater.

Three layers. Near silence. Silent Pro pipe cross-section showing outer shell, mineral core and smooth bore
  1. 01 · OuterPolypropylene (PP)Impact resistant and tough on site.
  2. 02 · MiddleMineral-reinforced PP-MDDense core for sound insulation and ring stiffness.
  3. 03 · InnerSmooth PPLow friction, light colour for CCTV inspection.

Silent Pro and Ultra Silent Pro.

Blue RAKtherm Silent Pro pipe

Silent Pro

Balanced acoustic performance for everyday buildings.

  • ColourBlue
  • Acoustic corePP with 40% barium sulphate
  • SizesDN 32 to 200
  • Best forApartments, offices, schools, retail
Grey RAKtherm Ultra Silent Pro pipe

Ultra Silent Pro

Maximum acoustic performance for noise-sensitive spaces.

  • ColourGrey
  • Acoustic corePP with 60% barium sulphate
  • Sound level12 and 17 dB(A), EN 14366 lab test
  • SizesDN 50 to 200
  • Best forHotels, hospitals, luxury homes

Pipes

Silent pipes.

Silent Pro catalogue ›
Ultra Silent Pro and Silent Pro pipes with bends and tees

Silent Pro pipe

Three-layer PP pipe with a mineral-reinforced core. Push-fit socket with a captive EPDM seal ring to EN 681-1.

DN 32, 50, 75, 110, 160 and 200 · Wall 1.8 to 4.9 mm

Ultra Silent Pro pipe

A heavier, higher-density core for our quietest drainage, with the same push-fit socket.

DN 50, 75, 110, 160 and 200, plus 200 heavy duty · Wall 4.0 to 7.1 mm

Fittings

Quiet at every joint.

Full fittings list ›

Fittings are made from the same PP-MD, with swept angles that keep flow smooth and noise low. The system includes bends, branches and tees, reducers and couplers, access and expansion fittings, sealing rings and pipe clamps.

Silent Pro bend, Ultra Silent Pro tee and reducer
Bends, tees and reducers
Ultra Silent Pro branches and a bend
Branches and bendsSwept angles for smooth flow.
Exploded view of a blue Silent Pro access door tee with O-ring and door
Access door teeFor inspection and maintenance.

Where calm matters.

Silent Pro drainage stack installed behind a bathroom wall between floors
Blue Silent Pro stack with branch connections and wall clamps
Risers and branch connections
Ultra Silent Pro stack in a modern building
Stacks near living spaces

Hotels

Hospitals

Homes & towers

Offices & schools

Install it right.

Real acoustic results depend on the installation too: clamps, supports and the building structure all play a part.

Silent Pro pipe fixed under a concrete ceiling with a pipe clamp
Fixed with pipe clamps
Pipe passing through a 150 mm concrete ceiling with insulating mat and fire collar
Through concrete ceilingsAt least 150 mm, with insulating mat and fireproofing collar.
Silent Pro pipe and bend installed at floor level in a building under construction
Below-ground and collector pipes

Tech Specs

Material
Mineral-reinforced polypropylene (PP-MD)
Construction
Three-layer co-extruded wall
Acoustic testing
EN 14366
Sound level, Ultra Silent Pro
12 dB(A) and 17 dB(A), under the specified test configuration
Sound level, Silent Pro
Refer to the current test report
Product and installation standards
EN 1451 · EN 12056
Jointing
Push-fit socket, captive EPDM seal ring to EN 681-1
Operating temperature
Up to 90°C continuous, 95°C intermittent
Wastewater
pH 2 to 12
Fire classification
EN 13501-1: Class D-s2, d0 · DIN 4102: B2
Sizes
Silent Pro DN 32 to 200 · Ultra Silent Pro DN 50 to 200
Service life
50 years
Warranty
15 years

Downloads

PDFSilent Pro catalogue PDFCertificates GUIDEInstallation guidelines

Explore other systems

PPR › uPVC › PEX & PE-RT › Reinforced & UV › Gas › Fire-resistant PPR › HDPE › Accessories & Tools › RAKduct ›

Specify silence.

Tell us about your project and we’ll recommend Silent Pro or Ultra Silent Pro.