Never corrodes.
Polyethylene doesn’t rust or corrode underground, so the network stays sound for decades.

Resists cracks.
High resistance to slow crack growth: over 5,000 hours for PE80 and over 1,000 hours for PE100 at 80°C.

Light to handle.
Far lighter than steel. Faster to move, lay and connect on site.

Two grades
HDPE · ORANGE
PE100
High-density polyethylene with higher strength, for higher-pressure mains.


01
Natural gas distribution
City and community networks.
02
LPG networks
Residential and commercial supply.
03
Propane
Distribution lines for propane gas.
04
After the meter
Low-pressure lines into the building.
Dimensions
In millimetres, by nominal outside diameter and SDR. Pick an SDR to highlight it.
Dimensions per ISO 4437 and ISO 3126. A dash means that SDR is not made in that diameter.
Physical properties
Fittings




For the complete range of gas fittings, see the RAKtherm gas booklet.
Our technical team will match every pipe, SDR and fitting to your project.
Never corrodes.
Polyethylene doesn’t rust or corrode underground, so the network stays sound for decades.

Resists cracks.
High resistance to slow crack growth: over 5,000 hours for PE80 and over 1,000 hours for PE100 at 80°C.

Light to handle.
Far lighter than steel. Faster to move, lay and connect on site.

Two grades
{{gCode}}
{{gName}}
{{gLead}}


01
Natural gas distribution
City and community networks.
02
LPG networks
Residential and commercial supply.
03
Propane
Distribution lines for propane gas.
04
After the meter
Low-pressure lines into the building.
Dimensions
In millimetres, by nominal outside diameter and SDR. Pick an SDR to highlight it.
Dimensions per ISO 4437 and ISO 3126. A dash means that SDR is not made in that diameter.
Physical properties
Fittings




For the complete range of gas fittings, see the RAKtherm gas booklet.
Our technical team will match every pipe, SDR and fitting to your project.