PPR Pipes & Fittings

Precision. Strength.
Zero leakage.

Made in UAE · DIN 8077 / 8078 · 50 yearsLearn more

Get the highlights.

Watch the welding guide ▷

A service life measured in decades.

Built for 50 years of service.

Green RAKtherm PPR manifold fitting on white, with rows of PPR tees on both sides

Continuous hot water. Short peaks handled.

0–90°C continuous, up to 100°C short-term.

Hot water running from a tap fed by a green RAKtherm reinforced PPR pipe

Fusion-welded. One piece, no weak points.

Pipe and fitting melt into one solid joint.

Green PPR pipe and tee being joined on a socket fusion welding machine

Safe for drinking water, food and medical use.

Clean, hygienic material for potable water.

Green RAKtherm reinforced PPR pipe beside a glass of clean drinking water

100% recyclable. No nickel. No chrome.

A material that can be recycled again and again.

Hand holding a green PPR cross fitting with a small plant growing from it

Our own PP-R resin

Blended in-house.
Built to last.

We blend and formulate our own PP-R (polypropylene random copolymer) resins, so only the highest-quality granules go into our pipes. The random mix of short and long hydrocarbon chains gives both rigidity and flexibility, for higher resistance to outside damage.

Compression strength

Takes the load inside walls and floors.

Elasticity

Flexes without cracking.

Anti-corrosive

Does not react with most chemicals.

Hygienic

Stops bacterial growth. Non-toxic, even when hot.

RAKtherm green PPR fittings: unions, reducing tee, brass-threaded union, cross and elbow

Fittings

A fitting for every turn.

See the catalogue for full details ›
RAKtherm green PPR elbow 90°
Elbow 90°Turn a line at a right angle.
RAKtherm green PPR reducing elbow 90°
Reducing elbow 90°Turn and change size in one fitting.
RAKtherm green PPR elbow 90° socket × spigot
Elbow 90° socket × spigotOne socket end, one spigot end.
RAKtherm green PPR tee
TeeEqual three-way branch.
RAKtherm green PPR reducing tee
Reducing teeBranch off to a smaller size.
RAKtherm green PPR cross
CrossFour-way junction.
RAKtherm green PPR reducer
ReducerStep between pipe sizes.
RAKtherm green PPR end cap
End capClose the end of a line.
RAKtherm green PPR crossover bend
Crossover bendPass one pipe over another.
RAKtherm green PPR female threaded adaptor
Female threaded adaptorBrass insert for threaded connections.
RAKtherm green PPR brass union
Brass unionFemale thread, easy to take apart.
RAKtherm green PPR union with female thread
Union with female threadLarge sizes, brass threaded insert.

Threaded adaptors follow DIN 2999. Sizes and the full fittings range are in the catalogue.

Fusion welding

One material.
One joint.

The welding machine heats to 260°C. Pipe and fitting fuse into one homogeneous piece. No glue. No threads. Nothing to loosen over 50 years.

Stage 1

Heat

Initial heating and fitting expansion.

Stage 2

Soak

Heat soaking creates the joint. Push straight, no twisting.

Stage 3

Cool

Into one solid, leak-free joint. Don’t stress it until cool.

Green PPR pipe and brass-insert fitting clamped in a RAKtherm butt welding machine

Welding saddles, step by step.

Branch off an existing line without cutting it.

Drilling a hole in a green RAKtherm PPR pipe
1. Drill the hole
Clean round hole drilled in the PPR pipe wall
2. Clean the hole
Heating the pipe and saddle with a saddle welding tool
3. Heat pipe and saddle
Pressing the green welding saddle onto the heated pipe
4. Press and hold
Full welding guide ›

Performance

Water flows.
For decades.

From chilled water in towers to hot water in hotels and hospitals, one PPR system carries it all.

Green RAKtherm PP-R pipes running across a wall with manifolds, valves and pressure gauges
RAKtherm PP-R distribution headers with branch lines and brass unions
Concealed RAKtherm PP-R hot and cold lines feeding a shower mixer

Tech Specs

Material
PP-R random copolymer, blended in-house
Standard
DIN 8077 / 8078
Operating temperature
0–90°C continuous
Peak temperature
Up to 100°C short-term
Service life
50 years
Linear expansion
α = 0.15 mm/mK
Joining
Fusion welding at 260°C · electro-fusion · saddles
Approved uses
Potable water, food, medical
Colours
Green, white, beige, black (varies by country)
Warranty
15 years
Sizes
20 to 160 mm (PN 25: 20 to 110 mm)
Pressure classes
PN 10 (SDR 11) · PN 16 (SDR 7.4) · PN 20 (SDR 6) · PN 25 (SDR 5)

Wherever water goes.

Buildings

Potable water in homes, high-rise towers, hotels, hospitals and every kind of building.

Industry

High-pressure water, compressed air, and aggressive acidic, alkaline or corrosive fluids.

Heating & cooling

Chilled water, boilers, radiators and under-floor heating.

Pools & gyms

Indoor and outdoor pools and their filtration circuits.

Agriculture

Irrigation and pressurised farm networks.

Rainwater

Rain drainage and collection systems.

Inside the building

  • Municipal supply to tanks and reservoirs
  • Boiler and radiator connections
  • Risers for water, ventilation and pressure relief
  • Pumps to upper tanks and distribution points
  • Meters and distributor manifolds
  • Distribution inside flats, apartments and houses
  • Under-floor networks and under-floor heating

Ready to build with PPR?

Our technical team will match every size and fitting to your project.