PEX & PE-RT Pipes & Fittings

Built for
the heat.

Flexible polyethylene pipes for hot water, radiators and under-floor heating.

Coils of white and yellow RAKtherm PEX pipe, blue and red sleeved pipe, and brass manifolds and compression fittings
Made in UAE · PE-X and PE-RT Learn more

Get the highlights.

Doesn’t soften under heat.

Higher thermal stability under load, for hot-water and heating networks.

White RAKtherm PEX pipe cut away to show a brass compression fitting inside

Resists stress cracking.

Strong against environmental stress cracks and slow crack growth over years of hot use.

White RAKtherm PEX pipes in blue and red protective sleeves laid in under-floor heating loops

Chemical resistant.

Handles treated water and additives in heating circuits.

Brass manifold feeding white and yellow RAKtherm PEX pipes on a wall

Two materials. Both made for heat.

White, yellow and sleeved RAKtherm PEX pipes with brass compression fittings

PE-X · CROSS-LINKED POLYETHYLENE

PEX

Cross-linking joins the polyethylene molecules, so the pipe does not soften at high temperature.

  • Higher thermal stability under load
  • Resists stress cracks and slow crack growth
  • Chemical, toughness and abrasion resistance

Cross-linked

Stronger at
the molecular level.

In PEX, the long polyethylene molecules are chemically bonded to each other in a process called cross-linking. This molecular network gives the pipe a firm memory of its shape, so it stays strong under hot water and pressure, yet bends easily around corners.

Flexible white RAKtherm PEX pipes bending from green PPR tees and valves inside a wall distribution box

Flexible PEX lines run from the distribution box to each fixture, with fewer joints along the way.

Pipes

PEX and PE-RT pipes.

PPR & PEX catalogue ›
White and yellow RAKtherm PEX pipes joined with brass compression couplings and an elbow

Fittings

Fittings and manifolds.

PEX booklet ›
RAKtherm brass PEX manifold
Manifold2 to 6 outlets
RAKtherm brass PEX female adaptor
Female adaptor16 to 32 mm
RAKtherm brass PEX male adaptor
Male adaptor16 to 32 mm
RAKtherm brass PEX male elbow
Male elbow20 to 32 mm
RAKtherm brass PEX female elbow
Female elbow20 to 32 mm
RAKtherm brass PEX female elbow with box
Female elbow with box16 and 20 mm
RAKtherm brass PEX male coupling
Male coupling1/2" to 1 1/4"
RAKtherm brass PEX pex union
PEX union16 mm × 1/2"
RAKtherm brass PEX end plug
End plug1/2" to 1 1/4"
RAKtherm brass PEX air release valve
Air release valve1/2"
RAKtherm brass PEX pex ball valve with union
PEX ball valve with union3/4" × 3/4", red or blue
RAKtherm brass PEX ball valve
Ball valve1/2" to 1 1/4", red or blue

Brass compression fittings for PEX pipes. See the PEX booklet for the complete range and article numbers.

Where PEX and PE-RT work.

Under-floor heating

Radiator networks

Hot-water supply

Tech Specs

Materials
Cross-linked polyethylene (PE-X), polyethylene of raised temperature (PE-RT)
Properties
Thermal stability under load, stress-crack, chemical and abrasion resistance
Warranty
15 years

Downloads

PDFPEX booklet PDFCertificates GUIDEInstallation guidelines

Explore other systems

Silent Pro & Ultra › PPR › uPVC › Reinforced & UV › Gas › Fire-resistant PPR › HDPE › Accessories & Tools › RAKduct ›

Heat, handled.

Our technical team will match every pipe, fitting and manifold to your heating project.